PORSCHE 944 GA SPEED EXHAUST FOR
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
The speedtech x51 style exhaust tips are designed to be a better quality fitment than oem. The tips were engineered with a beautiful chrome finish that enhances the double tip design.
General Fitment 911 TURBO/GT2 2007-09
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech has just released a their new sytem of exhaust design with x-cellerator cross-flow exhaust system. The cross flow designed to offer the discerning Porsche enthusiast the ultimate exhaust system with a number of performance and sound options in one complete package. The cross-flow designed by combining the exhaust pulses from both sides of the Porsche boxer motor with an "x" of "cross-flow" at the center of the muffler. Als...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
The stock exhaust of the Porsche 997.2 turbo is very restrictive compared to aftermarket systems. Porsche does this to meet sound and emission purposes like most OEM manufacturers. agency power set out to create an exhaust system for the new Porsche 997.2 turbo 6speed or pdk that did not drone, would produced amazing performance, and under throttle give an incredible sound. we have accomplished this! the new agency power exhaust not only saves about 30lbs off the rear end, it also improves power quite a bit.
With our single can muffler and 200cell high flow cats installed to the stock huge oval tips, we strapped our 2010 pdk to the dyno. The exhaust made a peak increase in standard mode of 15awhp and 23f...(choose a part on the right to read more)
$3,749.95
Make a selection
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche® owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. To further ensure quality, all of our exhaust systems meet the standards of the German independent testing agency tÜv; whose quality standards are among some of the strictest in the world.
Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result...(choose a part on the right to read more)
General Fitment 911 1970-73
$5,357.49
Make a selection
Speed technologies over the years have become the leader in providing the daily 700hp plus driven Porsche 996tt with the proper exhaust and accessories. With 20 years of experiences, the result is a line of superior performing exhausts for a variety of Porsche automobiles.
Speedtech 700 series y-pipe is designed to increase air flow to the throttle body. It is constructed with high quality, 2 1/2" mandrel bent 6061 aluminum inlet legs which merge into a 75mm outlet to feed a 75mm throttl body without any "neck-down" at the exit (such as other y-pipe designs we have seen). The speedtech y-pipe will improve flow of the additional air being generated on a modified car and deliver it to the engine quickly,...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$1,748.25
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
"brombacher" 996 GT2 (lightweight version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 4 x 3.5"(90mm/80mm) round tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power -...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$4,230.60
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Exhaust system with valves for the 997 -08
Facts:
- equal length headers with long tube design
- 100 cell German hjs sport catalysts with u torque design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2005-08
$8,792.70
Make a selection
FVD primary muffler bypass system for 2009- 997/997s
Fit with and without factory sport valved exhaust !
Facts (based on 997s):
- + 5 crank hp & + 4 crank torque gain
- 2 1/2" (63.5 mm) diameter tubing (reduces thermal stress)
- 5.5 lbs weight savings
- t 316 stainless steel for improved durability over t 304
- adjustable design for easy installation
- includes quick release clamps
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary
- fits with or without sound switch system
- weight: 4.6kg (10.14lbs)
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power...(choose a part on the right to read more)
General Fitment 911 2005-08
$1,543.30
Make a selection
Brombacher stainless steel exhaust system for the 997-2 facts: - equal length headers with long tube design - cat bypass - 2 3/4 tubing (70mm) - sealing cone style connections and quick release clamps - 4 x 3.5 (90mm) round tips - made in Germany -+ 28 hp & + 20 lb.-ft torque gain with exhaust system only. - weighs 72 lbs.(33,0 kg). The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg). Figures: genuine: engine - 6 cylinder boxer capacity - 3800ccm compression ratio - 12,5:1 max. Power - 283kw (385hp) @ 6500rpm max. Torque - 420nm (310lbf ft) @ 4400rpm max. Speed - 300km/h max. Rpm - 7500rpm acceleration 0-100km/h - 4.5s level 3 tuning (includes FVD software, sport airfilter and exhaust) max. Power - ...(choose a part on the right to read more)
$6,425.10
Make a selection
TUV version
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purchased seperately. They are "quad" 3.5" (90mm) tips and are made for this muffler. Kindly order bes 997 160 41s separately.
FVD le...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,479.10
Make a selection
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
Fabspeed for years has manufactures the worlds highest quality "maxflo" t304 stainless steel exhaust systems, carbon fiber style high performance air intake systems and more for Porsche, ferrari, maserati and lamborghini cars. All parts have been dyno tested and are street and track proven.
Fabspeed has just introduced their own intercooler system with the release of the fabspeed long-neck intercooler. Long-neck intercooler is the most efficient intercooler on the market with technology that flows as much as 900 cfm @2.6/1 pr ratio with less than 1 psi drop.
For k27 turbo
General Fitment 930 1975-77
$3,136.25
Make a selection
FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled quality, and incredible value. All of our exhausts are manufactured in Germany and are tested comprehensively for flow rate and characteristics, thermal stress, resistance to cracking, and longevity. Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche sound. In addition, Brombacherexhausts systems are available for ultimate performance full titanium. Our titanium system's are nearly...(choose a part on the right to read more)
Billy boat performance exhaust high performance stainless steel exhaust components for the 2006-2008 Porsche 997 turbo will enhance the driving experience of your Porsche. The mufflers are designed to be used with the stock exhaust tips. For a sportier note the design team at b&b also developed a set of primary muffler bypass pipes that will not only increase the sound they also give you added performance. New for 2010 the mufflers and pipes are avialable in a satin finish or in a polished ke finish. All of these components have no effect on the factory warranty or emissions.
Billy boat performance exhaust line of performance exhaust for the Porsche 997 turbo incorporates the latest in resonance control t...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$5,660.93
Make a selection
B&b exhaust muffler Porsche Boxster 987 & Cayman s 05+
Purge resonance technology is now available for all Porsche applications, including the Porsche Cayman s and Boxster 987. This radically new b&b technology tunes the exhaust note - the result is pure German performance sound at idle and under acceleration, while the interior cabin remains a comfortable ride at cruise speeds. Once again b&b advanced technology has proven why it is the leader for superior performance and sound quality for exhaust applications.
Features 3.5" round double wall tips.
For install instructionsclick here
To hear a sound clip on the b&b exhaust, here
This product is made to order, please allow 7-10 day...(choose a part on the right to read more)
General Fitment BOXSTER 2005-08
$2,070.20
Make a selection
Product details:
Reduce weight, increase power, and improve sound with bypass pipes for both the primary and secondary mufflers; includes adjustable turndown tip for exhaust volume control and gaskets.
Features:
-fits all Porsche 911 vehicles (1976-1989)
-very aggressive cup car sound. Recommended for track use only!
-adds 14 whp and significant throttle response
-constructed from 14-16 gauge, t304 c.n.c. Mandrel bent stainless steel
-saves 25 lbs from the vehicle
-direct replacement for OEM muffler works with stock cats and fabspeed’s cat bypass pipes
-easy on and easy off installation, perfect for weekend track events
-system c...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
Product details:
Complete high performance exhaust system provides loud & aggressive cup car sound with dual outlets
Features:
-fits all Porsche 911 Carrera vehicles (1976-1989)
-major improvement in power throughout the rpm range.
-saves 43 lbs from the rear of the vehicle
-loud and aggressive cup car sound. Recommended for track use only!
-constructed from high quality 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel tubing
-rsr long-tube headers feature equal length primary pipes with f1 style high velocity 3-into-1 pyramidal investment cast merge collectors
-dual outlet system comes with all required hardware
-available optio...(choose a part on the right to read more)
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89
From $2,795.00
Make a selection
Fabspeed provides a loud and aggressive performance exhaust system that replaces the restrictive factory mufflers with a free flowing resonated design. This system is recommended for track use only!
Features:
Single outlet design
General Fitment 911 1978-83
$1,343.25
Make a selection
Fabspeed for years has manufactures the worlds highest quality "maxflo" t304 stainless steel exhaust systems, carbon fiber style high performance air intake systems and more for Porsche, ferrari, maserati and lamborghini cars. All parts have been dyno tested and are street and track proven.
Fabspeed has just introduced their own intercooler system with the release of the fabspeed long-neck intercooler. Long-neck intercooler is the most efficient intercooler on the market with technology that flows as much as 900 cfm @2.6/1 pr ratio with less than 1 psi drop.
For stock turbo
General Fitment 930 1975-77
$3,136.25
Make a selection
Product details:
Direct replacement for restrictive factory headers; optimized for increased flow and quicker turbo spool
Features:
-fits all 911 turbo 930 vehicles (1976-1989)
-improves power delivery much sooner in the rpm range compared tot he restrictive OEM heat exchangers
-constructed from 14-16 gauge, c.n.c. Mandrel bent t304 stainless steel with high velocity 3-in-1 pyramidal investment cast merge collector for improved exhaust scavenging.
-this system will include a drip accumulator with double swivels and aeroquip lines with adapters and a graphite steel layered gasket for the drip accumulator.
-7/8” ...(choose a part on the right to read more)
General Fitment 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
$3,136.25
Make a selection
Fabspeed for years has manufactures the worlds highest quality "maxflo" t304 stainless steel exhaust systems, carbon fiber style high performance air intake systems and more for Porsche, ferrari, maserati and lamborghini cars. All parts have been dyno tested and are street and track proven.
Fabspeed is now offering their new performance package for the Porsche 911 turbo and now through vivid racing is available world wide. The performance package includes technology such as exhaust headers, dual maxflo mufflers and air intake.
All fabspeed manufactured products are direct replacements to oem, which restrict performance and are prone to fail. The fabspeed performance package provides an increase in...(choose a part on the right to read more)
General Fitment 930 1975-77
$5,173.02
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|